| Customization: | Available |
|---|---|
| Application: | Agricultural Irrigation, Chemical Transport, Industrial Processing, Oil and Gas Distribution, Wastewater Management, Water Supply, Petroleum, Natural Gas, Water Disposa etc. |
| certification: | CE, ISO9001 |
|
Still deciding? Get samples of US$ 15/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Two Variations of IPN8710 are Commonly Used:
- IPN8710-1:Comprising polyurethane polyethylene, modified epoxy resin, non-toxic anticorrosion pigments, fillers, and additives. Cured at room temperature, it forms a dense interpenetrating network with outstanding resistance to acid, alkali, salt, and corrosion. It exhibits strong adhesion.
- IPN8710-2A: Composed of epoxy, rubber resin modification, non-toxic anti-rust pigments, fillers, and additives. It boasts excellent chemical resistance and is non-toxic with resistance against microbial erosion.
| Standard: | DIN30670,CSA Z245.21,CSA Z245.20, AS1518, AWWA C213 |
| Material: | GR.B, X42, X52, X60, X70, Q235, Q275, Q345 |
| Specification: | DN200--DN2000 |
| Wall thickness: | Wall thickness: 5mm-60mm |
| Surface treatment: | Surface treatment: TPEP,3PE,3PP |
| Usages: | Water, gas, air and steam, black steel tubes and pipes are utilized for gas distribution inside and outside the house and for hot water circulation in boiler systems. It is also used for line pipes in oil and petroleum industries, for water wells and for water, gas and sewage purposes. It is not used for potable water or for drain waste or vent lines. |
| N.B | Epoxy powder coating | Adhesive(um) | Min wall thickness of anticorrosive coating(mm) | ||
| (mm) | (mm) | two layer | three layer | usual grade | strengthen grade |
| ≤100 | ≥80 | 1.8 | 2.5 | ||
| 250 | 200-400 | 170-250 | 2 | 2.7 | |
| 250 | 2.2 | 2.9 | |||
| 500 | 2.5 | 3.2 | |||
| DN≥800 | 3 | 3.7 | |||
| Item | Standard | APPLICATION | Grade |
| 1 | EN 10208 | Steel Pipes For Pipline For Combustible Fluids | L210GA, L235GA, L245GA, L290GA, L360GA L245NB, L290NB, L360NB, L415NB,L360QB, L415QB, L450QB, L485QB, L555QB |
| 2 | EN 10210 | Hot Finished Structural Hollow Sections of Non-alloy and Fine | S235JRH, S275J0H, S275J2H, S275NH, S275NLH,S355J0H, S355J2H, S355K2H, S355NH, S355NLH,S420NH, S420NLH, S460NH, S460NLH |
| 3 | EN 10216-1 | Seamless Steel Tubes for Pressure Purposes Non-Alloy Steel Tubes with Specified room Temperature Properties |
P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2 |
| 4 | EN 10216-2 | Seamless Steel Tubes for Pressure Purposes Non-Alloy And Alloy Steel Tubes with Specified elevated Temperature Properties |
P195GH, P235GH, P265GH,20MnNb6, 16Mo3, 8MoB5-4, 14MoV6-3, 10CrMo5-5, 13CrMo4-5, 10CrMo9-10, 11CrMo9-10, 25CrMo4, 20CrMoV13-5-5, 15NiCuMoNb5-6-4, X11CrMo5+1, X11CrMo5+NT1, X11CrMo5+NT2, X11CrMo9-1+1, X11CrMo9-1+NT, X10CrMoVNb9-1, X20CrNiV11-1 |
| 5 | EN 10216-3 | Seamless Steel Tubes for Pressure Purposes Alloy Fine Grain Steel Tubes |
P275NL1, P275NL2, P355N, P355NH, P355NL1, P355NL2, P460N, P460NH, P460NL1, P460NL2, P620Q, P620QH, P620QL, P690Q, P690QH, P690QL1, P690QL2 |
| 6 | EN 10216-4 | Seamless Steel Tubes for Pressure Purposes Non-alloy and alloy steel tubes with specified low temperature properties |
P215NL, P255QL, P265NL, 26CrMo4-2, 11MnNi5-3, 13MnNi6-3, 12Ni14, X12Ni5, X10Ni9 |
| 7 | EN 10224 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids | L235, L275, L355 |
| 8 | EN 10297-1 | Pressure drums and tubes | E235, E275, E315, E355, E470, E275K2, E355K2, E420J2, E460K2, E590K2, E730K2, C22E, C35E, C45E, C60E, 38Mn6, 41Cr4, 25CrMo4, 30CrMo4, 34CrMo4, 42CrMo4, 36CrNiMo4, 30CrNiMo8, 41NiCrMo7-3-2 |
| 9 | EN 10305 | Steel Tubes for Precision Applications | E215, E235, E355 |
| 10 | DIN 1630 | High quality unalloyed seamless steel tube | St37.4, St44.4, St52.4 |
| 11 | DIN 2391-1 | Steel Tubes for Precision Applications | St30Si, St30Al, St35, St45, St52 |
| 12 | DIN 2440 | Pipe with middle wall thickness for cutting thread | St33.2 |
| 13 | DIN 2441 | Pipe with thick wall and cutting thread | St33.2 |
| 14 | DIN 2445-1 | Dynamic loading of seamless steel tube fluid system pressure of 100 to 500 bar hot rolled steel pipe | St52.4 |
| 15 | DIN 2445-2 | Dynamic loading of seamless steel tube fluid system pressure of 100 to 500 bar hot precision pipe | St37.4 |
| 16 | DIN 2460 | Steel water pipes and fittings | St35 |
| 17 | DIN 17172 | Pipe for flammable liquids and gases | StE210.7, StE240.7, StE290.7, StE320.7, StE360.7, StE385.7, StE415.7, StE290.7TM, StE320.7TM, StE360.7TM, StE385.7TM, StE415.7TM, StE445.7TM, StE480.7TM |
| 18 | DIN 17173 | Carbon steel and alloy steel pipe for low temperature pressure | TTSt35N, TTSt35V, 26CrMo4, 11MnNi53, 13MnNi63, 10Ni14, 12Ni19, X8Ni19 |
| 19 | DIN 17175 | Heat resistant Seamless steel tube | St35.8, St45.8, 17Mn4, 19Mn5, 15Mo3, 13CrMo910, 10CrMo910, 14MoV63, X20CrMoV121 |
| 20 | DIN 17176 | Circular seamless steel tubes for hydrogen compression | 25CrMo4, 13CrMo44, 10CrMo910, 12CrMo910, 12CrMo1210, 12CrMo195, X12CrMo91,20CrMoV135, X20CrMoV121 |
| 21 | DIN 17179 | Special requirements for fine grained structural steel seamless steel tube | StE225, WStE255, TStE255, EStE255, StE285, WStE285, TStE285, EStE285, StE355, WStE355, TStE355, EStE355, StE420, WStE420, TStE420, EStE420, StE460, WStE460, TStE460, EStE460 |
| 22 | DIN 28180 | Seamless tubes for tubular heat exchangers | St37.0, St35.8, TTSt35N, 15Mo3, 13CrMo4 4 |
| 23 | JIS G3429 | Seamless steel tubes for high pressure gas containers | STH38, STH55, STH67 |
| 24 | JIS G3439 | Seamless steel pipe for oil casing drilling | STO-G, STO-H, STO-J, STO-N, STO-C, STO-D, STO-E |
| 25 | JIS G3441 | Alloy steel tubes for structural use | SCr 420TK, SCM415TK, SCM418TK, SCM420TK, SCM430TK, SCM435TK, SCM440TK |
| 26 | JIS G3444 | Carbon steel tubes for general construction | STK 30, STK 41, STK 50, STK 51, STK 55 |
| 27 | JIS G3445 | Carbon steel tubes for mechanical construction | STKM11A, STKM12A, STKM12B, STKM12C, STKM13A, STKM13B, STKM13C, STKM14A, STKM14B, STKM14C, STKM15A, STKM15C, STKM16A, STKM16C, STKM17A,STKM17C, STKM18A, STKM18B, STKM18C, STKM19A, STKM19C, STKM20A |
| 28 | JIS G3454 | Pressure piping carbon steel pipe | STPG 38, STPG 42 |
| 29 | JIS G3455 | High pressure piping carbon steel pipe | STS 38, STS 42, STS 49 |
| 30 | JIS G3456 | High pressure piping carbon steel pipe | STPT 38, STPT 42, STPT 49 |
| 31 | JIS G3458 | Piping alloy steel tube | STPA 12, STPA 20, STPA 22, STPA 23, STPA 24, STPA 25, STPA 26 |
| 32 | JIS G3460 | Low temperature Service steel tube | STPL 39, STPL 46, STPL 70 |
| 33 | JIS G3461 | Carbon steel pipe for boiler heat exchanger | STB 35, STB 42, STB 52 |
| 34 | JIS G3462 | Alloy steel pipe for boiler heat exchanger | STBA12, STBA13, STBA20,STBA22, STBA23, STBA24, STBA25, STBA26 |
| 35 | JIS G3464 | Steel tubes for low temperature heat exchangers | STBL 39, STBL46, STBL 70 |
| 36 | JIS G3465 | Seamless steel tube for drilling | STM-C55, STM-C65, STM-R60,STM-R70, STM-R80, STM-R85 |
| 37 | JIS G3467 | Steel tube for fired heater | STF 42, STFA12, STFA22, STFA23, STFA24, STFA25, STFA26 |
| 38 | ASTM A53 | Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless Pipe | Grade A, Grade B |
| 39 | ASTM A106 | Seamless carbon steel pipe for high temperature | Grade A, Grade B, Grade C |
| 40 | ASTM A161 | Refinery equipment with low carbon steel and carbon molybdenum steel seamless distillation tube |
Low Carbon Steel (LC), Grade T1 |
| 41 | ASTM A179 | Seamless cold drawn low carbon steel pipe for heat exchanger and condenser | A179 |
| 42 | ASTM A192 | Seamless carbon steel boiler tube for high pressure | A192 |
| 43 | ASTM A199 | Seamless cold-drawn alloy steel tubes for heat exchanger and condenser | T5, T9, T11, T22 |
| 44 | ASTM A209 | Seamless carbon-molybdenum alloy steel tubes for boilers and superheaters | Grade T1, Grade T1a, Grade T1b |
| 45 | ASTM A210 | SeamlessMedium-Carbon Steel Boiler and Super heater Tubes | Grade A-1, Grade C |
| 46 | ASTM A213 | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
T2, T5, T5b, T5c, T9, T11, T12,T17, T21, T22, T23, T24, T36, T91, T92, T122, T911 |
| 47 | ASTM A252 | Seamless steel pipe pile | Grade 1, Grade 2, Grade 3 |
| 48 | ASTM A333 | Seamless steel tubes for low temperature | Grade 1, Grade 3, Grade 4, Grade 6, Grade 7, Grade 8, Grade 9, Grade 10, Grade 11 |
| 49 | ASTM A334 | Seamless carbon and alloy steel tubes for low temperature | Grade 1, Grade 3, Grade 6, Grade 7, Grade 8, Grade 9, Grade 11 |
| 50 | ASTM A335 | Seamless ferrite alloy steel pipe for high temperature use | P1, P2, P5, P5b, P5c, P9, P11, P12, P15, P21, P22, P23, P36, P91, P92, P122, P911 |
| 51 | ASTM A423 | Low alloy steel seamless steel tube | Grade 1, Grade 2 |
| 52 | ASTM A500 | Circular and shaped seamless carbon steel cold-formed tubes | Grade A, Grade B, Grade C, Grade D |
| 53 | ASTM A501 | Thermally formed seamless carbon steel tube | Grade A, Grade B |
| 54 | ASTM A519 | Seamless carbon steel and alloy steel mechanical pipe | MT 1010, MT 1015, MT X 1015, MT 1020, MT X1020,1008, 1010, 1012, 1015, 1016, 1017, 1018, 1019,1020, 1021, 1022, 1025, 1026, 1030, 1035, 1040, 1045, 1050, 1518, 1524, 1541, 1330, 1335, 1340, 1345, 3140, E3310, 4012, 4023, 4024, 4027, 4028, 4037, 4042, 4047, 4063, 4118, 4130, 4135, 4137, 4140, 4142, 4145, 4147, 4150, 4320, 4337, E4337, 4340, E4340, 4422, 4427, 4520, 4615, 4617, 4620, 4621, 4718, 4720, 4815, 4817, 4820, 5015, 5046, 5115, 5120, 5130, 5132, 5135, 5140, 5145, 5147, 5150, 5155, 5160, 52100, E50100, E51100, E52100, 6118, 6120, 6150, E7140, 8115, 8615, 8617, 8620, 8622,8625, 8627, 8630, 8637, 8640, 8642, 8645, 8650, 8655, 8660, 8720, 8735,8740, 8742, 8822, 9255, 9260, 9262, E9310, 9840, 9850, 50B40, 50B44, 50B46, 50B50, 50B60, 51B60, 81B45,86B45, 94B15, 94B17, 94B30, 94B40,1118, 11L18, 1132, 1137, 1141, 1144, 1213, 12L14, 1215 |
| 55 | ASTM A523 | Seamless steel tubes with flat ends for high voltage tubular cable lines | Grade A, Grade B |
| 56 | ASTM A524 | Carbon seamless steel tubes at room temperature and lower temperature | Grade I, Grade II |
| 57 | ASTM A556 | Carbon steel cold-drawn seamless steel tubes for water heater | Grade A2, Grade B2, Grade C2 |
| 58 | ASTM A589 | Carbon seamless steel pipe for well drilling | Grade A, Grade B |
| 59 | ASTM A795 | Black and hot galvanized seamless steel tubes for fire protection | Grade A, Grade B |
We HDSTEEL-GROUP, consisit from Hebei Province Dianli Pipe Fitting Co., Ltd and Cangzhou Hongding Pipe Industry Co., Ltd(Hereafter abbreviated as HD-STEEL) is located along the famous "Elbow Capital"-Yanshan industrial zone, Cangzhou City, Hebei Province since 1997!
HD-STEEL is a professional manufacturer in Carbon steel/Alloy steel/ Stainless steel Pipe fittings & Flanges & ANTI-CORROSION STEEL PIPE in China. Our registered fund is 16.7 million, With strong economic strength & advanced production equipment. Certificated by API Q1, CE, ISO, CCS, AMSE, etc.
Products could customized by API, ASME(ANSI), EN, DIN, JIS, GOST, GB/T, ISO and so on. We continuing commitment to the production of quality products has made us internationally recognized in the following industries: power generation, petroleum, natural gas, chemical, shipbuilding, heating, papermaking, metallurgy, among others.
We group specializes in the production of pipe fittings, flanges and anti corrosion line pipes, steel inventory, domestic and foreign sales. We are committed to providing one-stop service for steel pipe products to customers around the world. And has leading technology of steel pipe fittings and flanges production and research at home and abroad, advanced and complete testing facilities .We strictly in accordance with the International standard quality management system for on-site management, our products have been inspected and approved by SGS, BV, MOODY, TUBOSCOPE and other international authoritative third-party organizations.
Our company adheres to the principles of "customer first", "quality first" and "credibility first" and is willing to establish a long-term cooperative relationship with you with our strong economic strength, advanced management experience and high-quality service for mutual benefit and common success.
We are fully confident that we will bring you higher economic benefits with excellent quality and reasonable prices. Choosing us means you have chosen a sincere friend and reliable partner. HD GROUP sincerely welcomes your visit.
Q:Can I Get A Sample For Testing?
A:Yes, We Can Provide Samples.
Q:Is It Safe On The Payment For Me As We Are The First Cooperation?
A:We Can Do The Trade Assurance On Made-In-China, Which Will Guarantee Your Payment Safety, We Also Accept Other Safe Payment Way As You Want.
Q:Do You Accept Product Customization?
A:Yes, We Can Accept Material Customization, Specification Model Customization, Drawing Customization, Packaging Customization.
Q:Can I Put Our Logo On The Product?
A:Yes, We Can Provide You With Laser Engraving Logo And Sticker Logo For Free.
Q:What Is The Moq?
A:For Trial Order, We Can Sell Even One Piece
Q:How Long Is The Product Warranty Period?
A:One Year, If The Product Is Non-Artificially Damaged During The Warranty Period, We Can Provide You With A New Product For Free.
Q:How Long Is The Delivery Time?
A:If We Have Stock, We Will Ship Within 5 Days, If There Is No Stock, We Will Ship Within 7-30 Days.
Q:Do You Accept Oem/Odm Service?
A:Yes, We Can Produce Products According To Your Requirements.
){kind=link}